GHSA-p9fm-f462-ggrg CVE-2026-33658
Rails Active Storage has a possible DoS vulnerability in proxy mode via multi-range requests
Medium
RubyGems
- Severity
- 0.0 / 10
- Medium · CVSS 4.0
- Exploit chance (EPSS)
- 0.45%
- Chance of exploitation in the next 30 days. Higher than 39.24% of scored vulnerabilities.
- Known exploited
- No
- Not in CISA's catalog
- Weakness
- CWE-770 Allocation of Resources Without Limits or Throttling
- Fix
8.1.2.1- Upgrade activestorage to this version or later
Description
Impact
Active Storage's proxy controller does not limit the number of byte ranges in an HTTP Range header. A request with thousands of small ranges causes disproportionate CPU usage compared to a normal request for the same file, possibly resulting in a DoS vulnerability.
Releases
The fixed releases are available at the normal locations.
Credit
This issue was responsibly reported by Hackerone researcher thwin_htet.
Affected versions
RubyGems
| Package | Vulnerable | Fixed in |
|---|---|---|
| activestorage | >= 8.1.0, < 8.1.2.1 |
8.1.2.1 |
| activestorage | >= 8.0.0, < 8.0.4.1 |
8.0.4.1 |
| activestorage | < 7.2.3.1 |
7.2.3.1 |
How to fix
Move to the fixed version or later with your package manager, update the lockfile, and run your tests. If the package only arrives through another dependency, upgrade that dependency first. If none of its releases pulls a fixed version yet, force the version with your package manager's override.
activestorage RubyGems → 8.1.2.1
- bundler
bundle update activestorage # Gemfile: gem "activestorage", ">= 8.1.2.1"
Severity breakdown
CVSS 4.0 0.0
CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N/E:U
- Attack vector
- Network
- Attack complexity
- Low
- Attack requirements
- Present
- Privileges required
- Low
- User interaction
- None
- Confidentiality (vulnerable system)
- None
- Integrity (vulnerable system)
- None
- Availability (vulnerable system)
- High
- Confidentiality (subsequent systems)
- None
- Integrity (subsequent systems)
- None
- Availability (subsequent systems)
- None
- Exploit maturity
- Unreported
CVSS 3.1 6.5
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
- Attack vector
- Network
- Attack complexity
- Low
- Privileges required
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- None
- Integrity
- None
- Availability
- High
Weakness
CWE-770: Allocation of Resources Without Limits or Throttling
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
How to prevent it
- Requirements: Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
- Architecture and Design: Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
- Architecture and Design: Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place, and it will help the administrator to identify who is committing the abuse. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.
- Implementation: Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does. When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, "boat" may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as "red" or "blue." Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code's environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright.
- Architecture and Design: For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks entirely. Then, these modified values would be submitted to the server.
- Architecture and Design: Mitigation of resource exhaustion attacks requires that the target system either: recognizes the attack and denies that user further access for a given amount of time, typically by using increasing time delays uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed. The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question. The second solution can be difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply requires more resources on the part of the attacker.
- Architecture and Design: Ensure that protocols have specific limits of scale placed on them.
- Architecture and Design, Implementation: If the program must fail, ensure that it fails gracefully (fails closed). There may be a temptation to simply let the program fail poorly in cases such as low memory conditions, but an attacker may be able to assert control before the software has fully exited. Alternately, an uncontrolled failure could cause cascading problems with other downstream components; for example, the program could send a signal to a downstream process so the process immediately knows that a problem has occurred and has a better chance of recovery. Ensure that all failures in resource allocation place the system into a safe posture.
- Operation, Architecture and Design: Use quotas or other resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available. However, these functions are not available on all operating systems. When the current levels get close to the maximum that is defined for the application (see CWE-770), then limit the allocation of further resources to privileged users; alternately, begin releasing resources for less-privileged users. While this mitigation may protect the system from attack, it will not necessarily stop attackers from adversely impacting other users. Ensure that the application performs the appropriate error checks and error handling in case resources become unavailable (CWE-703).
References
Advisories
Packages
Other links
Timeline
- Published
- Last updated by the source
- Latest EPSS score
Related advisories
| Advisory | Severity | Why it's related |
|---|---|---|
| GHSA-xr9x-r78c-5hrm Active Storage has possible arbitrary file read and remote code execution in Active Storage variant processing | Critical | Also affects activestorage |
| GHSA-73f9-jhhh-hr5m Rails Active Storage has possible glob injection in its DiskService | Critical | Also affects activestorage |
| GHSA-9xrj-h377-fr87 Rails Active Storage has possible Path Traversal in DiskService | Critical | Also affects activestorage |
| GHSA-r46p-8f7g-vvvg Rails Active Storage has a possible DoS vulnerability when in proxy mode via Range requests | High | Also affects activestorage |
| GHSA-qcfx-2mfw-w4cg Rails Active Storage has possible content type bypass via metadata in direct uploads | Medium | Also affects activestorage |
| GHSA-r4mg-4433-c7g3 Active Storage allowed transformation methods that were potentially unsafe | High | Also affects activestorage |
| GHSA-8h22-8cf7-hq6g Rails has possible Sensitive Session Information Leak in Active Storage | Medium | Also affects activestorage |
| GHSA-w749-p3v6-hccq Possible code injection vulnerability in Rails / Active Storage | Critical | Also affects activestorage |
MergeHarbor checks every repository's dependencies against this database, ranks what matters by exploitability and reachability, routes it to the owning team and opens the fix pull request.
Check your repos with MergeHarbor