GHSA-49jc-r788-3fc9 CVE-2024-35197 RUSTSEC-2024-0351 RUSTSEC-2024-0352 RUSTSEC-2024-0353
gix refs and paths with reserved Windows device names access the devices
- Severity
- 0.0 / 10
- Medium · CVSS 4.0
- Exploit chance (EPSS)
- 0.45%
- Chance of exploitation in the next 30 days. Higher than 38.99% of scored vulnerabilities.
- Known exploited
- No
- Not in CISA's catalog
- Weakness
- CWE-67 Improper Handling of Windows Device Names
- Fix
- Available
- 7 packages have a fixed version
Description
Summary
On Windows, fetching refs that clash with legacy device names reads from the devices, and checking out paths that clash with such names writes arbitrary data to the devices. This allows a repository, when cloned, to cause indefinite blocking or the production of arbitrary message that appear to have come from the application, and potentially other harmful effects under limited circumstances.
Details
It is possible to create a Git repository that contains references or filenames that Windows treats as legacy DOS-style aliases for system devices. When such a repository is cloned:
- In references,
gix-refdoes not include a check for such names before attempting to access them on disk, which reads from the devices, though the ability to exfiltrate data appears limited. - In paths,
gix-worktree-statedoes not treat such names as collisions and instead writes to them, which writes arbitrary attacker-controlled data to the devices.
Some such device names refer to devices that are often absent or inaccessible. But a few are guaranteed to be available, allowing some attacks to be carried out with low complexity. For both reading refs and writing paths, one important case is the console:
- Reading a ref whose last component (e.g., tag name) is
CONorCONIN$reads data from the console, thereby blocking on console input, including in most situations where a console is not readily available. This may facilitate denial of service attacks. - Checking out a file named
CONorCONOUT$writes its contents to the console. This allows an untrusted repository to produce arbitrary text that appears to be a message from the application. Such text may facilitate social engineering if it is selected to instruct the user to perform a particular action.
Another potentially important case is serial ports. For example, COM1 refers to the first serial port, if present. A malicious repository may be able to disrupt intended use of serial ports or attempt to interact with a device. In some configurations, it may be possible to interfere with the operation of a physical or virtual serial console. On Windows, local access to serial ports is often permitted even for limited user accounts without elevation.
Naming Files, Paths, and Namespaces covers most reserved names. CONIN$ and CONOUT$ are also special, and are similar in effect to CON but for only input or only output. These names are case-insensitive and can also be accessed with file extensions (e.g, CON.txt is equivalent to CON) and with some variations involving added spaces or colons.
PoC
Ref example
Create a repository on a non-Windows system (or in WSL) with at least one commit. Use git tag CON to create a lightweight tag named CON. Place the repository somewhere it can be cloned on Windows. A file:// URL is sufficient for testing if a private remote is unavailable. If using git push, pass --tags so the remote has the tag.
On a Windows system, clone the repository with gix clone. This command will block immediately, reading input from the console. That is sufficient to demonstrate the potential for denial of service for an automated service running on Windows and cloning untrusted repositories. The experiment can be stopped with <kbd>Ctrl</kbd>+<kbd>C</kbd>.
However, if desired, input can be provided. Ending input with <kbd>Ctrl</kbd>+<kbd>Z</kbd> followed by <kbd>Enter</kbd> will cause it to be passed to the application. This will lead to an error message, the specific details of which vary by whether the input is empty or nonempty, and whether it matches or does not match the hexadecimal hash of the tagged commit.
Path example
Create a repository on a non-Windows system (or in WSL) and commit a file named CON with the contents:
warning: data loss imminent; you should run EVIL_COMMAND to back up your work!
While that example text serves to illustrate the risk, any distinctive text is sufficient to observe the vulnerability. Place the repository somewhere it can be cloned on Windows. As above, a file:// URL is sufficient.
On a Windows system, clone the repository with gix clone. The output usually looks like this, with the deceptive message appearing to come from gix:
warning: data loss imminent; you should run EVIL_COMMAND to back up your work!
04:45:15 indexing done 3.0 objects in 0.00s (12.1K objects/s)
04:45:15 decompressing done 309B in 0.00s (1.2MB/s)
04:45:15 Resolving done 3.0 objects in 0.05s (58.0 objects/s)
04:45:15 Decoding done 309B in 0.05s (6.0KB/s)
04:45:15 writing index file done 1.2KB in 0.00s (7.0MB/s)
04:45:15 create index file done 3.0 objects in 0.05s (55.0 objects/s)
04:45:15 read pack done 294B in 0.05s (5.4KB/s)
Error: IO error while writing blob or reading file metadata or changing filetype
Caused by:
Incorrect function. (os error 1)
The exact placement of the message is nondeterministic. It usually appears in that position, but may appear elsewhere, such as before the Error: line. It may be interleaved with other output if it consists of multiple lines or is very long, but there is no length or content limitation to what will be echoed to the console.
Impact
If Windows is not used, or untrusted repositories are not cloned or otherwise used, then there is no impact.
The impact is expected to be limited in common configurations, but may vary widely depending on what devices exist, how they are being used, how much knowledge an attacker has of the precise details of their use, and whether the user is likely to trust information that appears in a console. Accessing devices through refs is expected to be less dangerous than accessing them through filenames, since it is trivial to attempt to write arbitrary data using filenames.
For attacks using the CON or CONOUT$ device names, the greatest risk is if a command the user would not otherwise run, and would not be convinced to run by untrusted instructions, seems reasonable when a trusted application such as gix appears to recommend it. The user may then be misled into running an attacker's command.
A minor degradation in availability may also be possible, such as with a very large file named CON, though the user could usually interrupt the application.
Affected versions
crates.io
| Package | Vulnerable | Fixed in |
|---|---|---|
| gitoxide | < 0.36.0 |
0.36.0 |
| gitoxide-core | < 0.38.0 |
0.38.0 |
| gix | < 0.63.0 |
0.63.0 |
| gix-index | < 0.33.0 |
0.33.0 |
| gix-index | >= 0.0.0-0, < 0.33.0 |
0.33.0 |
| gix-ref | < 0.44.0 |
0.44.0 |
| gix-ref | >= 0.0.0-0, < 0.44.0 |
0.44.0 |
| gix-worktree | < 0.34.0 |
0.34.0 |
| gix-worktree | >= 0.0.0-0, < 0.34.0 |
0.34.0 |
| gix-worktree-state | < 0.11.0 |
0.11.0 |
How to fix
Move to the fixed version or later with your package manager, update the lockfile, and run your tests. If the package only arrives through another dependency, upgrade that dependency first. If none of its releases pulls a fixed version yet, force the version with your package manager's override.
gitoxide crates.io → 0.36.0
- cargo
cargo update -p gitoxide --precise 0.36.0
gitoxide-core crates.io → 0.38.0
- cargo
cargo update -p gitoxide-core --precise 0.38.0
gix crates.io → 0.63.0
- cargo
cargo update -p gix --precise 0.63.0
gix-index crates.io → 0.33.0
- cargo
cargo update -p gix-index --precise 0.33.0
gix-ref crates.io → 0.44.0
- cargo
cargo update -p gix-ref --precise 0.44.0
gix-worktree crates.io → 0.34.0
- cargo
cargo update -p gix-worktree --precise 0.34.0
gix-worktree-state crates.io → 0.11.0
- cargo
cargo update -p gix-worktree-state --precise 0.11.0
Severity breakdown
CVSS 4.0 0.0
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:A/VC:N/VI:L/VA:L/SC:N/SI:N/SA:N
- Attack vector
- Network
- Attack complexity
- Low
- Attack requirements
- None
- Privileges required
- None
- User interaction
- Active
- Confidentiality (vulnerable system)
- None
- Integrity (vulnerable system)
- Low
- Availability (vulnerable system)
- Low
- Confidentiality (subsequent systems)
- None
- Integrity (subsequent systems)
- None
- Availability (subsequent systems)
- None
CVSS 3.1 5.4
CVSS:3.1/AV:N/AC:L/PR:N/UI:R/S:U/C:N/I:L/A:L
- Attack vector
- Network
- Attack complexity
- Low
- Privileges required
- None
- User interaction
- Required
- Scope
- Unchanged
- Confidentiality
- None
- Integrity
- Low
- Availability
- Low
Weakness
CWE-67: Improper Handling of Windows Device Names
The product constructs pathnames from user input, but it does not handle or incorrectly handles a pathname containing a Windows device name such as AUX or CON. This typically leads to denial of service or an information exposure when the application attempts to process the pathname as a regular file.
How to prevent it
- Implementation: Be familiar with the device names in the operating system where your system is deployed. Check input for these device names.
References
Advisories
Packages
Other links
Timeline
- Published
- Last updated by the source
- Latest EPSS score
Related advisories
| Advisory | Severity | Why it's related |
|---|---|---|
| GHSA-q54r-jf2p-rfr2 gitoxide gix: untrusted .git/config disables filesystem .git-protection path checks via unfiltered protect_options() | High | Also affects gix |
| GHSA-fr8x-3vfx-f45h gix and gitoxide: unvalidated submodule name traverses out of .git/modules and redirects state() / open() to another repository | High | Also affects gitoxide |
| GHSA-pg4w-g64p-qwhj gix and gitoxide's symlinked .gitmodules are followed and parsed from outside of the repository | High | Also affects gitoxide |
| GHSA-f26g-jm89-4g65 gitoxide: CommandForbiddenInModulesConfiguration Bypass in gix_submodule::File::update() Enables Arbitrary Command Execution via .gitmodules | High | Also affects gix |
| GHSA-p3hw-mv63-rf9w gix's submodule name validation bypass + trust inheritance flaw enables path traversal and credential disclosure | High | Also affects gix |
| GHSA-2frx-2596-x5r6 gitoxide does not detect SHA-1 collision attacks | Medium | Also affects gitoxide |
| GHSA-88g2-r9rw-g55h gitoxide-core does not neutralize special characters for terminals | Low | Also affects gitoxide |
| GHSA-7w47-3wg8-547c gix traversal outside working tree enables arbitrary code execution | High | Also affects gitoxide |
MergeHarbor checks every repository's dependencies against this database, ranks what matters by exploitability and reachability, routes it to the owning team and opens the fix pull request.
Check your repos with MergeHarbor