GHSA-9hx7-c53c-v6x8 CVE-2026-44177
Kirby CMS has pre-authentication path traversal and PHP file inclusion during user lookup
High
Packagist
- Severity
- 0.0 / 10
- High · CVSS 4.0
- Exploit chance (EPSS)
- 1.77%
- Chance of exploitation in the next 30 days. Higher than 78.14% of scored vulnerabilities.
- Known exploited
- No
- Not in CISA's catalog
- Weakness
- CWE-22 Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
- CWE-98 Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion')
- Fix
5.4.1- Upgrade getkirby/cms to this version or later
Description
TL;DR
This vulnerability affects all Kirby sites on Kirby 5.3.0-5.4.0 and is independent from setup conditions and authentication.
This vulnerability is of high severity for all Kirby sites.
Introduction
Path traversal is a type of attack that allows to access arbitrary filesystem paths. By using special elements such as .. and / separators, attackers can escape outside of the restricted location to access files or directories that are elsewhere on the system. One of the most common special elements is the ../ sequence, which in most modern operating systems is interpreted as the parent directory of the current location. Path traversal can give attackers information about the filesystem and directory structure on the server and can lead to additional attacks depending on the nature of the accessible files and directories.
PHP file inclusion is a type of attack that allows to load and execute PHP files on the server that are not intended for direct inclusion. Depending on the logic inside the PHP files, this can lead to disclosure of sensitive information or unintended, malicious actions.
Affected components
Kirby's Users collection received a performance improvement in Kirby 5.3.0. Starting in this release, Kirby loads user objects lazily when they are first needed. Users are queried by their user ID, which is then used to look up the user's account directory in the site/accounts directory.
This applies to the authentication API (accessible to unauthenticated requests), the users API (accessible to authenticated users only) as well as to other places that use $users->find() to look up an individual user with a request-provided email or user ID.
Impact
In affected releases, Kirby did not correctly validate the provided user ID, causing a path traversal vulnerability. This vulnerability results in the following impact:
- Arbitrary PHP file inclusion of files with the filename
index.php(e.g. the main PHP files of plugins), the impact of which depends on the contents and logic inside the includable files. - Probing of the existence of arbitrary directories on the server, which can allow attackers to fingerprint the server and site setup, including installed plugins and the content structure.
Patches
The problem has been patched in Kirby 5.4.1. Please update to this or a later version to fix the vulnerability.
In the mentioned release, Kirby has added additional checks to the user lookup that ensure that the provided user ID only contains valid characters and that the resulting path to the account directory is contained in the site/accounts directory.
Credits
Kirby thanks @offset for responsibly reporting the identified issue.
Affected versions
Packagist
| Package | Vulnerable | Fixed in |
|---|---|---|
| getkirby/cms | >= 5.3.0, < 5.4.1 |
5.4.1 |
How to fix
Move to the fixed version or later with your package manager, update the lockfile, and run your tests. If the package only arrives through another dependency, upgrade that dependency first. If none of its releases pulls a fixed version yet, force the version with your package manager's override.
getkirby/cms Packagist → 5.4.1
- composer
composer require getkirby/cms:^5.4.1
Severity breakdown
CVSS 4.0 0.0
CVSS:4.0/AV:N/AC:L/AT:N/PR:N/UI:N/VC:H/VI:L/VA:N/SC:N/SI:N/SA:N
- Attack vector
- Network
- Attack complexity
- Low
- Attack requirements
- None
- Privileges required
- None
- User interaction
- None
- Confidentiality (vulnerable system)
- High
- Integrity (vulnerable system)
- Low
- Availability (vulnerable system)
- None
- Confidentiality (subsequent systems)
- None
- Integrity (subsequent systems)
- None
- Availability (subsequent systems)
- None
Weakness
CWE-22: Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal')
The product uses external input to construct a pathname that is intended to identify a file or directory that is located underneath a restricted parent directory, but the product does not properly neutralize special elements within the pathname that can cause the pathname to resolve to a location that is outside of the restricted directory.
How to prevent it
- Implementation: Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does. When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, "boat" may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as "red" or "blue." Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code's environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright. When validating filenames, use stringent allowlists that limit the character set to be used. If feasible, only allow a single "." character in the filename to avoid weaknesses such as CWE-23, and exclude directory separators such as "/" to avoid CWE-36. Use a list of allowable file extensions, which will help to avoid CWE-434. Do not rely exclusively on a filtering mechanism that removes potentially dangerous characters. This is equivalent to a denylist, which may be incomplete (CWE-184). For example, filtering "/" is insufficient protection if the filesystem also supports the use of "\" as a directory separator. Another possible error could occur when the filtering is applied in a way that still produces dangerous data (CWE-182). For example, if "../" sequences are removed from the ".../...//" string in a sequential fashion, two instances of "../" would b
- Architecture and Design: For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks entirely. Then, these modified values would be submitted to the server.
- Implementation: Inputs should be decoded and canonicalized to the application's current internal representation before being validated (CWE-180). Make sure that the application does not decode the same input twice (CWE-174). Such errors could be used to bypass allowlist validation schemes by introducing dangerous inputs after they have been checked. Use a built-in path canonicalization function (such as realpath() in C) that produces the canonical version of the pathname, which effectively removes ".." sequences and symbolic links (CWE-23, CWE-59). This includes: realpath() in C getCanonicalPath() in Java GetFullPath() in ASP.NET realpath() or abs_path() in Perl realpath() in PHP
- Architecture and Design: Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid [REF-1482].
- Operation: Use an application firewall that can detect attacks against this weakness. It can be beneficial in cases in which the code cannot be fixed (because it is controlled by a third party), as an emergency prevention measure while more comprehensive software assurance measures are applied, or to provide defense in depth [REF-1481].
- Architecture and Design, Operation: Run your code using the lowest privileges that are required to accomplish the necessary tasks [REF-76]. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment. For example, database applications rarely need to run as the database administrator, especially in day-to-day operations.
- Architecture and Design: When the set of acceptable objects, such as filenames or URLs, is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames or URLs, and reject all other inputs. For example, ID 1 could map to "inbox.txt" and ID 2 could map to "profile.txt". Features such as the ESAPI AccessReferenceMap [REF-185] provide this capability.
- Architecture and Design, Operation: Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software. OS-level examples include the Unix chroot jail, AppArmor, and SELinux. In general, managed code may provide some protection. For example, java.io.FilePermission in the Java SecurityManager allows the software to specify restrictions on file operations. This may not be a feasible solution, and it only limits the impact to the operating system; the rest of the application may still be subject to compromise. Be careful to avoid CWE-243 and other weaknesses related to jails.
- Architecture and Design, Operation: Store library, include, and utility files outside of the web document root, if possible. Otherwise, store them in a separate directory and use the web server's access control capabilities to prevent attackers from directly requesting them. One common practice is to define a fixed constant in each calling program, then check for the existence of the constant in the library/include file; if the constant does not exist, then the file was directly requested, and it can exit immediately. This significantly reduces the chance of an attacker being able to bypass any protection mechanisms that are in the base program but not in the include files. It will also reduce the attack surface.
- Implementation: Ensure that error messages only contain minimal details that are useful to the intended audience and no one else. The messages need to strike the balance between being too cryptic (which can confuse users) or being too detailed (which may reveal more than intended). The messages should not reveal the methods that were used to determine the error. Attackers can use detailed information to refine or optimize their original attack, thereby increasing their chances of success. If errors must be captured in some detail, record them in log messages, but consider what could occur if the log messages can be viewed by attackers. Highly sensitive information such as passwords should never be saved to log files. Avoid inconsistent messaging that might accidentally tip off an attacker about internal state, such as whether a user account exists or not. In the context of path traversal, error messages which disclose path information can help attackers craft the appropriate attack strings to move through the file system hierarchy.
- Operation, Implementation: When using PHP, configure the application so that it does not use register_globals. During implementation, develop the application so that it does not rely on this feature, but be wary of implementing a register_globals emulation that is subject to weaknesses such as CWE-95, CWE-621, and similar issues.
CWE-98: Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion')
The PHP application receives input from an upstream component, but it does not restrict or incorrectly restricts the input before its usage in "require," "include," or similar functions.
How to prevent it
- Architecture and Design: Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid [REF-1482].
- Architecture and Design: When the set of acceptable objects, such as filenames or URLs, is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames or URLs, and reject all other inputs. For example, ID 1 could map to "inbox.txt" and ID 2 could map to "profile.txt". Features such as the ESAPI AccessReferenceMap [REF-185] provide this capability.
- Architecture and Design: For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks entirely. Then, these modified values would be submitted to the server.
- Architecture and Design, Operation: Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software. OS-level examples include the Unix chroot jail, AppArmor, and SELinux. In general, managed code may provide some protection. For example, java.io.FilePermission in the Java SecurityManager allows the software to specify restrictions on file operations. This may not be a feasible solution, and it only limits the impact to the operating system; the rest of the application may still be subject to compromise. Be careful to avoid CWE-243 and other weaknesses related to jails.
- Architecture and Design, Operation: Run your code using the lowest privileges that are required to accomplish the necessary tasks [REF-76]. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment. For example, database applications rarely need to run as the database administrator, especially in day-to-day operations.
- Implementation: Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does. When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, "boat" may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as "red" or "blue." Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code's environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright. When validating filenames, use stringent lists that limit the character set to be used. If feasible, only allow a single "." character in the filename to avoid weaknesses such as CWE-23, and exclude directory separators such as "/" to avoid CWE-36. Use a list of allowable file extensions, which will help to avoid CWE-434. Do not rely exclusively on a filtering mechanism that removes potentially dangerous characters. This is equivalent to a denylist, which may be incomplete (CWE-184). For example, filtering "/" is insufficient protection if the filesystem also supports the use of "\" as a directory separator. Another possible error could occur when the filtering is applied in a way that still produces dangerous data (CWE-182). For example, if "../" sequences are removed from the ".../...//" string in a sequential fashion, two instances of "../" would be rem
- Architecture and Design, Operation: Store library, include, and utility files outside of the web document root, if possible. Otherwise, store them in a separate directory and use the web server's access control capabilities to prevent attackers from directly requesting them. One common practice is to define a fixed constant in each calling program, then check for the existence of the constant in the library/include file; if the constant does not exist, then the file was directly requested, and it can exit immediately. This significantly reduces the chance of an attacker being able to bypass any protection mechanisms that are in the base program but not in the include files. It will also reduce the attack surface.
- Architecture and Design, Implementation: Understand all the potential areas where untrusted inputs can enter your software: parameters or arguments, cookies, anything read from the network, environment variables, reverse DNS lookups, query results, request headers, URL components, e-mail, files, filenames, databases, and any external systems that provide data to the application. Remember that such inputs may be obtained indirectly through API calls. Many file inclusion problems occur because the programmer assumed that certain inputs could not be modified, especially for cookies and URL components.
- Operation: Use an application firewall that can detect attacks against this weakness. It can be beneficial in cases in which the code cannot be fixed (because it is controlled by a third party), as an emergency prevention measure while more comprehensive software assurance measures are applied, or to provide defense in depth [REF-1481].
- Operation, Implementation: Develop and run your code in the most recent versions of PHP available, preferably PHP 6 or later. Many of the highly risky features in earlier PHP interpreters have been removed, restricted, or disabled by default.
- Operation, Implementation: When using PHP, configure the application so that it does not use register_globals. During implementation, develop the application so that it does not rely on this feature, but be wary of implementing a register_globals emulation that is subject to weaknesses such as CWE-95, CWE-621, and similar issues. Often, programmers do not protect direct access to files intended only to be included by core programs. These include files may assume that critical variables have already been initialized by the calling program. As a result, the use of register_globals combined with the ability to directly access the include file may allow attackers to conduct file inclusion attacks. This remains an extremely common pattern as of 2009.
- Operation: Set allow_url_fopen to false, which limits the ability to include files from remote locations.
References
Packages
Other links
Timeline
- Published
- Last updated by the source
- Latest EPSS score
Related advisories
| Advisory | Severity | Why it's related |
|---|---|---|
| GHSA-9vx2-j98c-p72w Kirby: Access to image files and limited access to JSON files outside of the site root via path traversal in the media handling | High | Also affects getkirby/cms |
| GHSA-6j4c-mgqr-qv76 Kirby: Access to image files outside of the site root via path traversal in the media handling | Medium | Also affects getkirby/cms |
| GHSA-67mx-6wf2-92xp Kirby: File upload permissions are not checked during processing of chunk data | High | Also affects getkirby/cms |
| GHSA-rf2p-vh74-7vvh Kirby: System path exposure from error messages in the REST API | Medium | Also affects getkirby/cms |
| GHSA-r3w8-2c5r-h9j9 Kirby: `pages.access` permission is not checked in the `site/find` REST API route | High | Also affects getkirby/cms |
| GHSA-89cp-7p28-jffg Kirby: Access to files of top-level drafts is not protected by permissions | Medium | Also affects getkirby/cms |
| GHSA-whxw-24jc-cwmv Kirby: External Initialization of the Panel on reverse proxy setups with the `Forwarded` header | Critical | Also affects getkirby/cms |
| GHSA-wr9h-4r83-f4v6 Kirby: Cross-site scripting (XSS) from incomplete HTML/XML sanitization in `Dom::sanitize()` | High | Also affects getkirby/cms |
MergeHarbor checks every repository's dependencies against this database, ranks what matters by exploitability and reachability, routes it to the owning team and opens the fix pull request.
Check your repos with MergeHarbor