GHSA-5cj2-3jr2-5h77 CVE-2026-53855
OpenClaw: Shell positional parameters could weaken strict inline-eval checks
High
npm
- Severity
- 0.0 / 10
- High · CVSS 4.0
- Exploit chance (EPSS)
- 0.26%
- Chance of exploitation in the next 30 days. Higher than 17.82% of scored vulnerabilities.
- Known exploited
- No
- Not in CISA's catalog
- Weakness
- CWE-269 Improper Privilege Management
- CWE-284 Improper Access Control
- CWE-78 Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
- CWE-863 Incorrect Authorization
- Fix
2026.4.2- Upgrade openclaw to this version or later
Description
Summary
Shell positional parameters could weaken strict inline-eval checks. In affected versions, a command request that combines allowlisted tools with shell positional arguments could place inline-eval content in a shell carrier not covered by the strict check.
This advisory is scoped to the named feature and configuration. It does not change OpenClaw's trusted-operator model: authenticated Gateway operators, installed plugins, and intentional local execution surfaces remain trusted unless a separate policy, approval, allowlist, sandbox, or auth boundary is crossed.
Impact
When the affected feature is enabled and reachable, this could run shell-provided content outside the intended allowlist rule. Practical impact depends on the operator's configuration and whether lower-trust input can reach that path.
Patched Versions
The first stable patched version is 2026.4.2.
Mitigations
avoid allowlisting shell carrier patterns and require approval for shell wrappers until patched. As general hardening, keep channel and tool allowlists narrow, avoid sharing one Gateway between mutually untrusted users, and disable the affected feature when it is not needed.
Affected versions
npm
| Package | Vulnerable | Fixed in |
|---|---|---|
| openclaw | < 2026.4.2 |
2026.4.2 |
How to fix
Move to the fixed version or later with your package manager, update the lockfile, and run your tests. If the package only arrives through another dependency, upgrade that dependency first. If none of its releases pulls a fixed version yet, force the version with your package manager's override.
openclaw npm → 2026.4.2
- npm
npm install openclaw@2026.4.2- yarn
yarn add openclaw@2026.4.2- pnpm
pnpm add openclaw@2026.4.2
Severity breakdown
CVSS 4.0 0.0
CVSS:4.0/AV:N/AC:L/AT:P/PR:L/UI:N/VC:H/VI:H/VA:N/SC:N/SI:N/SA:N
- Attack vector
- Network
- Attack complexity
- Low
- Attack requirements
- Present
- Privileges required
- Low
- User interaction
- None
- Confidentiality (vulnerable system)
- High
- Integrity (vulnerable system)
- High
- Availability (vulnerable system)
- None
- Confidentiality (subsequent systems)
- None
- Integrity (subsequent systems)
- None
- Availability (subsequent systems)
- None
CVSS 3.1 8.1
CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N
- Attack vector
- Network
- Attack complexity
- Low
- Privileges required
- Low
- User interaction
- None
- Scope
- Unchanged
- Confidentiality
- High
- Integrity
- High
- Availability
- None
Weakness
CWE-269: Improper Privilege Management
The product does not properly assign, modify, track, or check privileges for an actor, creating an unintended sphere of control for that actor.
How to prevent it
- Architecture and Design, Operation: Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
- Architecture and Design: Follow the principle of least privilege when assigning access rights to entities in a software system.
- Architecture and Design: Consider following the principle of separation of privilege. Require multiple conditions to be met before permitting access to a system resource.
CWE-284: Improper Access Control
The product does not restrict or incorrectly restricts access to a resource from an unauthorized actor.
How to prevent it
- Architecture and Design, Operation: Very carefully manage the setting, management, and handling of privileges. Explicitly manage trust zones in the software.
- Architecture and Design: Compartmentalize the system to have "safe" areas where trust boundaries can be unambiguously drawn. Do not allow sensitive data to go outside of the trust boundary and always be careful when interfacing with a compartment outside of the safe area. Ensure that appropriate compartmentalization is built into the system design, and the compartmentalization allows for and reinforces privilege separation functionality. Architects and designers should rely on the principle of least privilege to decide the appropriate time to use privileges and the time to drop privileges.
CWE-78: Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection')
The product constructs all or part of an OS command using externally-influenced input from an upstream component, but it does not neutralize or incorrectly neutralizes special elements that could modify the intended OS command when it is sent to a downstream component.
How to prevent it
- Architecture and Design: If at all possible, use library calls rather than external processes to recreate the desired functionality.
- Architecture and Design, Operation: Run the code in a "jail" or similar sandbox environment that enforces strict boundaries between the process and the operating system. This may effectively restrict which files can be accessed in a particular directory or which commands can be executed by the software. OS-level examples include the Unix chroot jail, AppArmor, and SELinux. In general, managed code may provide some protection. For example, java.io.FilePermission in the Java SecurityManager allows the software to specify restrictions on file operations. This may not be a feasible solution, and it only limits the impact to the operating system; the rest of the application may still be subject to compromise. Be careful to avoid CWE-243 and other weaknesses related to jails.
- Architecture and Design: For any data that will be used to generate a command to be executed, keep as much of that data out of external control as possible. For example, in web applications, this may require storing the data locally in the session's state instead of sending it out to the client in a hidden form field.
- Architecture and Design: For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks entirely. Then, these modified values would be submitted to the server.
- Architecture and Design: Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid. For example, consider using the ESAPI Encoding control [REF-45] or a similar tool, library, or framework. These will help the programmer encode outputs in a manner less prone to error.
- Implementation: While it is risky to use dynamically-generated query strings, code, or commands that mix control and data together, sometimes it may be unavoidable. Properly quote arguments and escape any special characters within those arguments. The most conservative approach is to escape or filter all characters that do not pass an extremely strict allowlist (such as everything that is not alphanumeric or white space). If some special characters are still needed, such as white space, wrap each argument in quotes after the escaping/filtering step. Be careful of argument injection (CWE-88).
- Implementation: If the program to be executed allows arguments to be specified within an input file or from standard input, then consider using that mode to pass arguments instead of the command line.
- Architecture and Design: If available, use structured mechanisms that automatically enforce the separation between data and code. These mechanisms may be able to provide the relevant quoting, encoding, and validation automatically, instead of relying on the developer to provide this capability at every point where output is generated. Some languages offer multiple functions that can be used to invoke commands. Where possible, identify any function that invokes a command shell using a single string, and replace it with a function that requires individual arguments. These functions typically perform appropriate quoting and filtering of arguments. For example, in C, the system() function accepts a string that contains the entire command to be executed, whereas execl(), execve(), and others require an array of strings, one for each argument. In Windows, CreateProcess() only accepts one command at a time. In Perl, if system() is provided with an array of arguments, then it will quote each of the arguments.
- Implementation: Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does. When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, "boat" may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as "red" or "blue." Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code's environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright. When constructing OS command strings, use stringent allowlists that limit the character set based on the expected value of the parameter in the request. This will indirectly limit the scope of an attack, but this technique is less important than proper output encoding and escaping. Note that proper output encoding, escaping, and quoting is the most effective solution for preventing OS command injection, although input validation may provide some defense-in-depth. This is because it effectively limits what will appear in output. Input validation will not always prevent OS command injection, especially if you are required to support free-form text fields that could contain arbitrary characters. For example, when invoking a mail program, you might need to allow the subject field to contain otherwise-dangerous inputs like ";" and ">" characters, which would ne
- Architecture and Design: When the set of acceptable objects, such as filenames or URLs, is limited or known, create a mapping from a set of fixed input values (such as numeric IDs) to the actual filenames or URLs, and reject all other inputs.
- Operation: Run the code in an environment that performs automatic taint propagation and prevents any command execution that uses tainted variables, such as Perl's "-T" switch. This will force the program to perform validation steps that remove the taint, although you must be careful to correctly validate your inputs so that you do not accidentally mark dangerous inputs as untainted (see CWE-183 and CWE-184).
- Operation: Run the code in an environment that performs automatic taint propagation and prevents any command execution that uses tainted variables, such as Perl's "-T" switch. This will force the program to perform validation steps that remove the taint, although you must be careful to correctly validate your inputs so that you do not accidentally mark dangerous inputs as untainted (see CWE-183 and CWE-184).
- Implementation: Ensure that error messages only contain minimal details that are useful to the intended audience and no one else. The messages need to strike the balance between being too cryptic (which can confuse users) or being too detailed (which may reveal more than intended). The messages should not reveal the methods that were used to determine the error. Attackers can use detailed information to refine or optimize their original attack, thereby increasing their chances of success. If errors must be captured in some detail, record them in log messages, but consider what could occur if the log messages can be viewed by attackers. Highly sensitive information such as passwords should never be saved to log files. Avoid inconsistent messaging that might accidentally tip off an attacker about internal state, such as whether a user account exists or not. In the context of OS Command Injection, error information passed back to the user might reveal whether an OS command is being executed and possibly which command is being used.
- Operation: Use runtime policy enforcement to create an allowlist of allowable commands, then prevent use of any command that does not appear in the allowlist. Technologies such as AppArmor are available to do this.
- Operation: Use an application firewall that can detect attacks against this weakness. It can be beneficial in cases in which the code cannot be fixed (because it is controlled by a third party), as an emergency prevention measure while more comprehensive software assurance measures are applied, or to provide defense in depth [REF-1481].
- Architecture and Design, Operation: Run your code using the lowest privileges that are required to accomplish the necessary tasks [REF-76]. If possible, create isolated accounts with limited privileges that are only used for a single task. That way, a successful attack will not immediately give the attacker access to the rest of the software or its environment. For example, database applications rarely need to run as the database administrator, especially in day-to-day operations.
- Operation, Implementation: When using PHP, configure the application so that it does not use register_globals. During implementation, develop the application so that it does not rely on this feature, but be wary of implementing a register_globals emulation that is subject to weaknesses such as CWE-95, CWE-621, and similar issues.
CWE-863: Incorrect Authorization
The product performs an authorization check when an actor attempts to access a resource or perform an action, but it does not correctly perform the check.
How to prevent it
- Architecture and Design: Divide the product into anonymous, normal, privileged, and administrative areas. Reduce the attack surface by carefully mapping roles with data and functionality. Use role-based access control (RBAC) [REF-229] to enforce the roles at the appropriate boundaries. Note that this approach may not protect against horizontal authorization, i.e., it will not protect a user from attacking others with the same role.
- Architecture and Design: Ensure that access control checks are performed related to the business logic. These checks may be different than the access control checks that are applied to more generic resources such as files, connections, processes, memory, and database records. For example, a database may restrict access for medical records to a specific database user, but each record might only be intended to be accessible to the patient and the patient's doctor [REF-7].
- Architecture and Design: Use a vetted library or framework that does not allow this weakness to occur or provides constructs that make this weakness easier to avoid. For example, consider using authorization frameworks such as the JAAS Authorization Framework [REF-233] and the OWASP ESAPI Access Control feature [REF-45].
- Architecture and Design: For web applications, make sure that the access control mechanism is enforced correctly at the server side on every page. Users should not be able to access any unauthorized functionality or information by simply requesting direct access to that page. One way to do this is to ensure that all pages containing sensitive information are not cached, and that all such pages restrict access to requests that are accompanied by an active and authenticated session token associated with a user who has the required permissions to access that page.
- System Configuration, Installation: Use the access control capabilities of your operating system and server environment and define your access control lists accordingly. Use a "default deny" policy when defining these ACLs.
References
Advisories
Packages
Other links
Timeline
- Published
- Last updated by the source
- Latest EPSS score
Related advisories
| Advisory | Severity | Why it's related |
|---|---|---|
| GHSA-3x84-qq85-fj65 OpenClaw: Browser CDP discovery could accept blocked WebSocket URLs | High | Also affects openclaw |
| GHSA-9c3v-684m-579c OpenClaw MCP SSE redirects could forward Authorization headers | Medium | Also affects openclaw |
| GHSA-f397-5vjw-v2c2 OpenClaw: Shell inline-command parsing could miss an allowlist check | High | Also affects openclaw |
| GHSA-rx78-29qr-5hq8 OpenClaw: Workspace-derived service PATH could influence trash command selection | High | Also affects openclaw |
| GHSA-ccwh-wwpp-6wg5 OpenClaw: Host environment sanitizer missed two Node.js control variables | High | Also affects openclaw |
| GHSA-985f-72mj-8gf7 OpenClaw: Tool group policy callers could accept unvalidated group IDs | Medium | Also affects openclaw |
| GHSA-9v8j-9c9g-w66c OpenClaw: Bootstrap token replay could widen pending pairing scopes | Medium | Also affects openclaw |
| GHSA-c226-q6fx-6j6c OpenClaw: macOS Swift exec allowlist missed combined POSIX inline flags | Medium | Also affects openclaw |
MergeHarbor checks every repository's dependencies against this database, ranks what matters by exploitability and reachability, routes it to the owning team and opens the fix pull request.
Check your repos with MergeHarbor