EEF-CVE-2026-82728 CVE-2026-82728 GHSA-g83f-2j6r-q6m4
Unbounded HTTP/1 status-line and chunk-extension buffering in Mint causes memory-exhaustion DoS
- Severity
- 0.0 / 10
- Unknown · CVSS 4.0
- Exploit chance (EPSS)
- 0.52%
- Chance of exploitation in the next 30 days. Higher than 44.45% of scored vulnerabilities.
- Known exploited
- No
- Not in CISA's catalog
- Weakness
- CWE-770 Allocation of Resources Without Limits or Throttling
- Fix
1.10.0- Upgrade mint to this version or later
Description
Summary
Allocation of Resources Without Limits or Throttling vulnerability in elixir-mint mint allows a remote HTTP server to exhaust memory on the client host and cause a denial of service.
Two HTTP/1 response-parser states accumulate server data without any cap. In lib/mint/http1.ex, decode_status_line/4 stores the unconsumed data in conn.buffer when the status line is incomplete, and decode_body/5 does the same for an unterminated chunk-extension line. Both wait for a CRLF the server never has to send, and conn.buffer is prepended to every subsequent socket message. The :max_header_list_size budget is wired only into decode_headers/5 and decode_trailer_headers/4, so neither of these states is covered by it. A malicious server, or one reached through an attacker-controlled redirect or a fetched URL, streams bytes indefinitely until the BEAM node is killed by the operating system out-of-memory handler. The chunk-extension variant is reached after a valid status line and a complete, valid header section, so an intermediary inspecting only headers sees an ordinary 200 response.
This issue affects mint: from 0.1.0 before 1.10.0.
Affected versions
Hex
| Package | Vulnerable | Fixed in |
|---|---|---|
| mint | >= 0.1.0, < 1.10.0 |
1.10.0 |
How to fix
Move to the fixed version or later with your package manager, update the lockfile, and run your tests. If the package only arrives through another dependency, upgrade that dependency first. If none of its releases pulls a fixed version yet, force the version with your package manager's override.
mint Hex → 1.10.0
- mix
{:mint, "~> 1.10.0"} # then: mix deps.update mint
Severity breakdown
CVSS 4.0 0.0
CVSS:4.0/AV:N/AC:L/AT:P/PR:N/UI:N/VC:N/VI:N/VA:H/SC:N/SI:N/SA:N
- Attack vector
- Network
- Attack complexity
- Low
- Attack requirements
- Present
- Privileges required
- None
- User interaction
- None
- Confidentiality (vulnerable system)
- None
- Integrity (vulnerable system)
- None
- Availability (vulnerable system)
- High
- Confidentiality (subsequent systems)
- None
- Integrity (subsequent systems)
- None
- Availability (subsequent systems)
- None
Weakness
CWE-770: Allocation of Resources Without Limits or Throttling
The product allocates a reusable resource or group of resources on behalf of an actor without imposing any intended restrictions on the size or number of resources that can be allocated.
How to prevent it
- Requirements: Clearly specify the minimum and maximum expectations for capabilities, and dictate which behaviors are acceptable when resource allocation reaches limits.
- Architecture and Design: Limit the amount of resources that are accessible to unprivileged users. Set per-user limits for resources. Allow the system administrator to define these limits. Be careful to avoid CWE-410.
- Architecture and Design: Design throttling mechanisms into the system architecture. The best protection is to limit the amount of resources that an unauthorized user can cause to be expended. A strong authentication and access control model will help prevent such attacks from occurring in the first place, and it will help the administrator to identify who is committing the abuse. The login application should be protected against DoS attacks as much as possible. Limiting the database access, perhaps by caching result sets, can help minimize the resources expended. To further limit the potential for a DoS attack, consider tracking the rate of requests received from users and blocking requests that exceed a defined rate threshold.
- Implementation: Assume all input is malicious. Use an "accept known good" input validation strategy, i.e., use a list of acceptable inputs that strictly conform to specifications. Reject any input that does not strictly conform to specifications, or transform it into something that does. When performing input validation, consider all potentially relevant properties, including length, type of input, the full range of acceptable values, missing or extra inputs, syntax, consistency across related fields, and conformance to business rules. As an example of business rule logic, "boat" may be syntactically valid because it only contains alphanumeric characters, but it is not valid if the input is only expected to contain colors such as "red" or "blue." Do not rely exclusively on looking for malicious or malformed inputs. This is likely to miss at least one undesirable input, especially if the code's environment changes. This can give attackers enough room to bypass the intended validation. However, denylists can be useful for detecting potential attacks or determining which inputs are so malformed that they should be rejected outright.
- Architecture and Design: For any security checks that are performed on the client side, ensure that these checks are duplicated on the server side, in order to avoid CWE-602. Attackers can bypass the client-side checks by modifying values after the checks have been performed, or by changing the client to remove the client-side checks entirely. Then, these modified values would be submitted to the server.
- Architecture and Design: Mitigation of resource exhaustion attacks requires that the target system either: recognizes the attack and denies that user further access for a given amount of time, typically by using increasing time delays uniformly throttles all requests in order to make it more difficult to consume resources more quickly than they can again be freed. The first of these solutions is an issue in itself though, since it may allow attackers to prevent the use of the system by a particular valid user. If the attacker impersonates the valid user, they may be able to prevent the user from accessing the server in question. The second solution can be difficult to effectively institute -- and even when properly done, it does not provide a full solution. It simply requires more resources on the part of the attacker.
- Architecture and Design: Ensure that protocols have specific limits of scale placed on them.
- Architecture and Design, Implementation: If the program must fail, ensure that it fails gracefully (fails closed). There may be a temptation to simply let the program fail poorly in cases such as low memory conditions, but an attacker may be able to assert control before the software has fully exited. Alternately, an uncontrolled failure could cause cascading problems with other downstream components; for example, the program could send a signal to a downstream process so the process immediately knows that a problem has occurred and has a better chance of recovery. Ensure that all failures in resource allocation place the system into a safe posture.
- Operation, Architecture and Design: Use quotas or other resource-limiting settings provided by the operating system or environment. For example, when managing system resources in POSIX, setrlimit() can be used to set limits for certain types of resources, and getrlimit() can determine how many resources are available. However, these functions are not available on all operating systems. When the current levels get close to the maximum that is defined for the application (see CWE-770), then limit the allocation of further resources to privileged users; alternately, begin releasing resources for less-privileged users. While this mitigation may protect the system from attack, it will not necessarily stop attackers from adversely impacting other users. Ensure that the application performs the appropriate error checks and error handling in case resources become unavailable (CWE-703).
References
Advisories
Fixes and patches
Packages
Other links
Timeline
- Published
- Last updated by the source
- Latest EPSS score
Related advisories
| Advisory | Severity | Why it's related |
|---|---|---|
| EEF-CVE-2026-94194 Mint HTTP/1 client applies chunked framing when chunked is not the final transfer coding, enabling response smuggling through intermediaries | Not rated yet | Also affects mint |
| EEF-CVE-2026-92103 Mint HTTP/2 client buffers oversized frames up to 16 MiB before enforcing max_frame_size | Not rated yet | Also affects mint |
| EEF-CVE-2026-91043 HPACK-indexed cookie fields in Mint HTTP/2 responses bypass max_header_list_size and exhaust client memory | Not rated yet | Also affects mint |
| EEF-CVE-2026-82672 Unvalidated chunk-size line tail in Mint HTTP/1 client enables response smuggling against strict intermediaries on pooled connections | Not rated yet | Also affects mint |
| EEF-CVE-2026-82729 Quadratic chunk-size parsing in Mint.HTTP1.Parse allows CPU-exhaustion DoS | Not rated yet | Also affects mint |
| EEF-CVE-2026-59249 Sign-tolerant HTTP/1 chunk-size parser in Mint enables response smuggling against strict intermediaries on pooled connections | Not rated yet | Also affects mint |
| EEF-CVE-2026-59246 Zero-length HTTP/2 CONTINUATION frames bypass Mint's header-block byte-size cap and exhaust client memory | Not rated yet | Also affects mint |
| EEF-CVE-2026-58229 Unbounded HTTP/1 response-header and chunked-trailer accumulation in Mint causes memory-exhaustion DoS | Not rated yet | Also affects mint |
Credits: Andrea Leopardi, Jonatan Männchen / EEF, Tr3bor
MergeHarbor checks every repository's dependencies against this database, ranks what matters by exploitability and reachability, routes it to the owning team and opens the fix pull request.
Check your repos with MergeHarbor